Motorola WiNG 5.5 Reference Manual page 298

5 - 212 WiNG 5.5 Access Point System Reference Guide
Admin Status
VLAN
IP Address
Once the configurations of existing Virtual Interfaces have been reviewed, determine whether a new interface requires
creation, or an existing Virtual Interface requires edit (override) or deletion.
8. Select Add to define a new Virtual Interface configuration,
Interface or Delete
9. The Basic Configuration
an existing one is being modified.
10. If creating a new Virtual Interface, use the spinner control to define a numeric ID from 1 - 4094.
A green check mark defines the listed Virtual Interface configuration as active and
enabled with its supported profile. A red "X" defines the Virtual Interface as currently
disabled. The interface status can be modified when a new Virtual Interface is created or
an existing one modified.
Displays the numerical VLAN ID associated with each listed interface.
Defines whether DHCP was used to obtain the primary IP address used by the Virtual
Interface configuration.
to permanently remove a selected Virtual Interface.
Figure 5-132 Device Overrides - Virtual Interfaces - Basic Configuration screen
screen displays by default regardless of a whether a new Virtual Interface is being created or
Edit to modify or override the configuration of an existing Virtual