Motorola WiNG 5.5 Reference Manual page 780

13 - 42 WiNG 5.5 Access Point System Reference Guide
State
Timeout
Keep Alive
The Proxy tab displays the following:
Mesh Point Name
Destination Addr
Proxy Address
Age
Proxy Owner
VLAN
12.Select Device Data
Displays the Link State for each mesh point:
• Init - indicates the link has not been established or has expired.
• Enabled - indicates the link is available for communication.
• Failed - indicates the attempt to establish the link failed and cannot be retried yet.
• In Progress - indicates the link is being established but is not yet available.
Displays the maximum value in seconds that the link is allowed to stay in the In Progress
state before timing out.
Yes indicates the local MP acts as a supplicant to authenticate the link and not let it expire
(if possible). No indicates that the local MP does not need the link and will let it expire if
not maintained by the remote MP.
Displays the name of each configured mesh point in the RF Domain.
The destination is the endpoint of mesh path. It may be a MAC address or a mesh point ID.
Displays the MAC Address of the proxy used in the mesh point.
Displays the age of the proxy connection for each of the mesh points in the RF Domain.
The owner (MPID) is used to distinguish the device that is the neighbor.
The VLAN ID used as a virtual interface with this proxy. A value of 4095 indicates that
there is no VLAN ID.
Transmit.