Motorola WiNG 5.5 Reference Manual page 727

7. Define the following configuration parameters required for the import of the RSA key:
Key Name
Key Passphrase
URL
Protocol
Port
IP Address
Hostname
Username/Password
Path
8. Select OK to import the defined RSA key. Select
9. To optionally export a RSA key to a remote location, select the
10. Export the key to a redundant RADIUS server so it can be imported without generating a second key. If there's more than
one RADIUS authentication server, export the certificate and don't generate a second key unless you want to deploy two
root certificates.
Enter the 32 character maximum name assigned to identify the RSA key.
Define the key used by the server (or repository) of the target RSA key. Select the Show
textbox to expose the actual characters used in the passphrase. Leaving the option
unselected displays the passphrase as a series of asterisks "*".
Provide the complete URL to the location of the RSA key. If needed, select Advanced to
expand the dialog to display network address information to the location of the target key.
The number of additional fields that populate the screen is dependent on the selected
protocol.
Select the protocol used for importing the target key. Available options include:
• tftp
• ftp
• sftp
• http
• cf
• usb1
• usb2
• usb3
• usb4
Use the spinner control to set the port. This option is not valid for cf and usb1 - 4.
Enter IP address of the server used to import the RSA key. This option is not valid for cf
and usb1 - 4.
Provide the hostname of the server used to import the RSA key. This option is not valid for
cf and usb1 - 4.
These fields are enabled if using ftp or sftp protocols. Specify the username and the
password for that username to access the remote servers using these protocols.
Specify the path to the RSA key. Enter the complete relative path to the key on the server.
Cancel to revert the screen to its last saved configuration.
Export button from the RSA Keys screen.
Operations 12 - 45