Table of Contents
Advertisement
5 - 150 WiNG 5.5 Access Point System Reference Guide
15. Use the parameters within the
configuration.
Enable Controller Upgrade
of AP Firmware
Number of Concurrent
Upgrades
16. Select
OK
to save the changes made to the profile's Management Firmware configuration. Select
last saved configuration.
17. Select the
Heartbeat
18. Select the
Service Watchdog
running. The Service Watchdog is enabled by default.
19. Select
OK
to save the changes made to the profile maintenance Heartbeat tab. Select
configuration.
Automatic Adopted AP Firmware
Select the access point model to upgrade to a newer firmware version using its
associated Virtual Controller AP's most recent firmware file for that model. The only
available option is AP71XX.
Use the spinner control to define the maximum number (from 1 - 20) of adopted APs
that can receive a firmware upgrade at the same time. Keep in mind, during a
firmware upgrade, the access point is offline and unable to perform its normal
wireless client support function until the upgrade process is complete.
option from the Management menu.
Figure 5-95 Profile Management - Device Heartbeat Settings screen
option to implement heartbeat messages to ensure other associated devices are up and
Upgrade field to define an automatic firmware
Reset
to revert to the last saved
Reset
to revert to the
Hide quick links:
Advertisement
Table of Contents
