Motorola WiNG 5.5 Reference Manual page 347

Figure 5-161 Device Overrides - Network - OSPF Interface Settings screen
22. Review existing Interface Settings
Name
Type
Description
Admin Status
VLAN
IP Address
23. Select the Add button to define a new set of virtual interface basic settings, or
virtual interface configuration.
using:
Displays the name defined for the interface configuration.
Displays the type of interface.
Lists each interface's 32 character maximum description.
Displays whether Admin Status privileges have been enabled or disabled for the OSPF
route's virtual interface connection.
Lists the VLAN IDs set for each listed OSPF route virtual interface.
Displays the IP addresses defined as virtual interfaces for dynamic OSPF routes. Zero
config and DHCP can be used to generate route addresses, or a primary and secondary
address can be manually provided.
Device Configuration 5 - 261
Edit to update the settings of an existing