Profile Tab; Buttons - Honeywell MX9 User Manual

Profile Tab

Note: Tap the Commit button to save changes before leaving this panel or the SCU. If the panel is exited before tapping
the Commit button, changes are not saved!
Setting
Profile
SSID
Client Name
Power Save
Tx Power
Bit Rate
Radio Mode
Auth Type
EAP Type
Encryption
When logged in as an Admin use the Profile tab to manage profiles. When not logged in as an Admin, the parameters can
be viewed, and cannot be changed. The buttons on this tab are dimmed if the user is not logged in as Admin. The Profile
tab was previously labeled Config.
Note: The settings for Auth Type, EAP Type and Encryption depend on the security type chosen.

Buttons

New Button
Creates a new profile with the default settings (see Profile Parameters) and prompts for a unique name. If the name is
not unique, an error message is displayed and the new profile is not created.
Rename Button
Assigns a new, unique name. If the new name is not unique, an error message is displayed and the profile is not
renamed.
Delete Button
Deletes the profile. The current active profile cannot be deleted and an error message is displayed if a delete is
attempted.
WEP Keys / PSK Keys Button
11 - 8
Default
Default
Blank
Blank
Fast
Maximum
Auto
See Profile Parameters for default
Open
None
None