Admin Login - Honeywell MX9 User Manual

The Auto Profile selection screen displays all currently configured profiles. Tap on the check box for any profiles that
are to be included in Auto Profile selection then tap ok to save.
To enable Auto Profile, tap the On button on the Main tab.
When Auto Profile is On, if the radio goes out of range from the currently selected profile, the radio then begins to
attempt to connect to the profiles listed under Auto Profile.
The search continues until:
• the SCU connects to and, if necessary, authenticates with, one of the specified profiles or
• the Off button is tapped to turn off Auto Profile.
Note: Do not include any profiles with an Ad Hoc Radio Mode in this listing.

Admin Login

To login to Administrator mode, tap the Admin Login button.
Once logged in, the button label changes to Admin Logout. The admin is automatically logged out when the SCU is
exited. The Admin can either tap the Admin Logout button, or the OK button to logout. The Administrator remains
logged in when the SCU is not closed and a Suspend/Resume function is performed.
Enter the Admin password (the default password is SUMMIT and is case sensitive) and tap OK. If the password is
incorrect, an error message is displayed.
The Administrator default password can be changed on the Main Tab (page 11-5).
The end-user can:
• Turn the radio on or off on the Main Tab (page 11-5).
• Select an active Profile on the Main tab.
• View the current parameter settings for the profiles on the Profile Tab (page 11-8).
• View the global parameter settings on the Global Tab (page 11-14).
• View the current connection details on the Status Tab (page 11-12).
11 - 6