Tcp/Ip - Honeywell MX9 User Manual

TCP/IP

The TCP/IP tab contains a check box for indicating that TCP/IP parameters are to be obtained from the network DHCP
server.
This tab also contains fields for entering a static IP address and the addresses of the primary and secondary DNS
servers, if DHCP and DNS are not used.
Tap the check box to enable or disable DHCP and/or DNS. When the Use DHCP check box is enabled, the static IP
address is disabled. When the Use DNS check box is enabled, the DNS address fields are disabled.
If DHCP and DNS are not used, enter the addresses for:
• Static IP Address
• Primary DNS server
• Secondary DNS server
5 - 61