Wireless Manager - Honeywell MX9 User Manual

Wireless Manager

Provides information on the currently connected wireless network(s). The following image is an example only.
If more than one wireless device is being managed, the All bar is displayed. Tap the All bar to disable/enable all wireless
devices at once.
If a Wi-Fi (802.11) radio is present, the Wi-Fi bar indicates the status of the Wi-Fi connection, such as:
Off
On
Unavailable
Available
Connecting
SSID
Network Card
If the Wi-Fi radio is Off, tapping the Wi-Fi bar turns the radio On. Once the radio is On, the status may cycle through other
states such as Available and Connecting before reporting a connection status such as the SSID.
If the Wi-Fi radio is in any other state than Off, tapping the Wi-Fi bar turns the radio Off.
If Bluetooth is present, the Bluetooth bar indicates the status of the connections, such as:
Off
On
Visible
If the Bluetooth radio is Off, tapping the Bluetooth bar turns the radio On. Once the radio is On, it may cycle to Visible if the
MX9 is discoverable.
If the Bluetooth radio is in any other state than Off, tapping the Bluetooth bar turns the Bluetooth radio Off.
If WAN is On, it is also shown on this panel. When tapped however, WWAN is disabled and the WAN button is removed
from this panel. To enable WAN again, open the WAN control panel.
The Wi-Fi radio is off
The Wi-Fi radio is on
No Wi-Fi networks are available
Wi-Fi networks are available but not connected
The radio is connecting to a Wi-Fi network
The SSID of the connected Wi-Fi network when managed by Wireless Manager
When the radio is connected and managed by the Summit Client Utility
The Bluetooth radio is off
The Bluetooth radio is on
The MX9 is discoverable
5 - 69