Chapter 5 - Software Configuration; Introduction; Windows Mobile Operating System; Installed Software - Honeywell MX9 User Manual

5
Software Configuration

Introduction

There are several different aspects to the setup and configuration of the MX9. Many of the setup and configuration settings are
dependent upon the optional features such as hardware and software installed on the mobile device. The examples found in this
section are to be used as examples only, because the configuration of your specific MX9 may vary. The following sections
provide a general reference for the configuration of the MX9 and some of its optional features.
Note: For best results frequently charge the MX9 battery using an external power source to ensure continuous charging of the
internal Super-cap battery.

Windows Mobile Operating System

For general use instruction, refer to commercially available Windows Mobile user guides or the Windows Mobile on-line Help
application installed with the MX9.
This section's contents assumes the system administrator is familiar with Microsoft Windows options and capabilities loaded on
most standard Windows Vista or later desktop computers.
Therefore, the sections that follow describe only those Windows capabilities that are unique to the MX9 and its Windows Mobile
environment.

Installed Software

Note: Some standard Windows options require an external modem connection. Modems are not available.
When you order an MX9 you receive the software files required by the separate programs needed for operation and wireless
client communication. The files are stored in folders in the mobile device.
This section lists the contents of the folders and the general function of the files. Files installed in each MX9 are specific to the
intended function of the MX9.
Files installed in Windows mobile devices that are configured for a wireless environment usually contain a radio specific driver –
the driver for the radio is specific to the manufacturer of the radio installed in the wireless host environment and are not
interchangeable.

Software Load

The software loaded on the MX9 computer consists of Windows Mobile Operating System, hardware-specific OEM Adaptation
Layer, device drivers, Internet Explorer for Windows Mobile browser and MX9-specific utilities. The software supported by the
MX9 is summarized below:
• Full Operating System License: Includes all operating system components, including Windows Mobile kernel, file system,
communications, connectivity (for remote APIs), device drivers, events and messaging, graphics, keyboard and touch screen
input, window management, and common controls.
• Network and Device Drivers
• Bluetooth (Option)
• AppLock (Option)
• RFTerm (VT220, TN5250, TN3270) Terminal Emulation (Option)
• Honeywell API Routines
Note: Contact Customer Support

Software Backup

Application programs and data that are normally RAM resident are backed up via ActiveSync.

Version Control

Version numbers are applied to the boot loader and the OS image independently. The version information stored consists of
the build number, plus the date and time of compile (in lieu of a build number). These version numbers are stored in non-
volatile storage, where the user cannot inadvertently modify them. A Settings panel and API are provided so the user can
reference the version numbers for support purposes.
(page 16-1) to get access to updated software releases.
5 - 1