Com1 Tab - Honeywell MX9 User Manual

COM1 Tab

Setting
Baud Rate
Data Bits
Stop Bits
Parity
Integrated laser scanner default values are 9600 Baud, 8 data bits, 1 stop bit and No parity.
If these values are changed, the default values are restored after a cold boot or reflashing.
Note: COM1 does not support 5V switchable power on Pin 9 for tethered scanners connected to the MX9 I/O port. Tethered
scanners must be connected to a MX9 cradle.
Default
9600
8
1
None
8 - 5