Honeywell MX9 User Manual page 160

Message
Registry read failure
Reset system work area failure
Shift pressed
Shift
Show taskbar
Switching to admin-backdoor
Switching to admin-hotkey press
Switching to admin-kbdhook.dll not found
Switching to admin-keyboard hook
initialization failure
Switching to admin-registry read failure
Switching to TaskbarScreenMode
Switching to user mode
Switching to user-hotkey press
Taskbar hook failure
Taskbar hook OK
6 - 18
Explanation and/or corrective action
The registry read failed. The registry information
read when this message is logged is the application
information. It the Administration key cannot be
opened or if the AppName value is missing or
empty, this error is logged. The other application
information is not required. If the AppName value is
not available, AppLock cannot switch into user
mode.
The system work area is adjusted when in user
mode to cover the taskbar area. The system work
area has to be adjusted to exclude the taskbar area
in administration mode. AppLock was unable to
adjust this area.
The Shift key has been pressed and trapped by the
HotKey processing.
Processing the hotkey and backdoor entry
The taskbar is now being made visible and enabled.
The system is currently in user mode and is now
switching to admin mode. The switch occurred
because of the backdoor key presses were entered
by the administrator.
The system is currently in user mode and is now
switching to admin mode. The switch occurred
because of a hotkey press by the administrator.
The keyboard hook load failed, so AppLock
switches to admin mode. If a password is specified,
the password prompt is displayed and remains until
a valid password is entered.
If the keyboard hook initialization fails, AppLock
switches to admin mode. If a password is specified,
the password prompt is displayed and remains until
a valid password is entered.
See the explanation of the "Registry read failure"
above. AppLock is switching into Admin mode. If a
password has been configured, the prompt will be
displayed and will not be dismissed until a valid
password is entered.
In administration mode, the taskbar is visible and
enabled.
The registry was successfully read and AppLock is
starting the process to switch to user mode.
The system is currently in admin mode and is now
switching to user mode. The switch occurred
because of a hotkey press by the administrator.
AppLock is unable to control the taskbar to prevent
the locked application from re-enabling it.
AppLock successfully installed control of the
taskbar.
Level
LOG_ERROR
LOG_ERROR
LOG_EX
LOG_EX
LOG_PROCESSING
LOG_PROCESSING
LOG_PROCESSING
LOG_PROCESSING
LOG_PROCESSING
LOG_PROCESSING
LOG_EX
LOG_PROCESSING
LOG_PROCESSING
LOG_ERROR
LOG_EX