Registry - Honeywell MX9 User Manual

Registry

Choose an MX9 software reload scheme.
Load User Defaults Button
When tapped, a standard load file dialog is opened, to allow the user to pick a Registry Save (.RSG) file. The applet then
copies the specified User registry file to the Active registry. The user is asked to verify a reboot, and then the applet does a
warmboot to activate the new registry.
Load User Defaults takes 20 seconds from SD card, or 10 seconds from internal flash.
Save User Defaults Button
When tapped, a standard Save File dialog is opened, to allow the user to name the Registry Save (.RSG) file. The applet
then copies the Active registry to the specified User registry file.
Save User Defaults takes 30 seconds to save to SD card, or 10 seconds to save to internal flash.
Load Factory Defaults Button
The applet copies the Factory Default registry from the OS to the Active registry (by deleting the current registry). The user
is asked to verify a reboot, and then the applet does a restart to activate the factory default registry. If a user password has
been set, the applet warns the user that the password will be erased, and asks them to enter it before the reboot is allowed.
Warmboot Button
When tapped, the OS does a registry flush (Active registry saved to Flash registry hive), and then a warmboot.
Restart Button
When tapped, the OS does a registry flush, and then a restart.
5 - 52