Adapters - Honeywell MX9 User Manual

Adapters

Note: Review the network settings configuration utilities and the default values before setting All Adapters to Enable in
the Adapters applet.
Manage Network Settings
When enabled, the Enabler will control the network settings. This parameter cannot be configured from the Avalanche
Mobility Center Console and is enabled by default.
Manage Wireless Settings
When enabled, the Enabler will control the wireless settings. This parameter cannot be configured from the Avalanche
Mobility Center Console and is disabled by default. For Summit clients, Manage Wireless Settings should not be
checked as configuration packages provide more radio configuration options.
Current Adapter
Lists all network adapters currently installed on the MX9.
Primary Adapter
Indicates if the Enabler is to attempt to configure the primary adapter (active only if there are multiple network adapt-
ers).
Icon on taskbar
Places the Avalanche icon in the Avalanche taskbar that may, optionally, override the standard Windows taskbar.
Use Avalanche Network Profile
The Enabler will apply all network settings sent to it by the Mobile Device Server.
Avalanche Icon
Selecting the Avalanche Icon will access the Avalanche Network Profile tab which will display current network settings.
Use Manual Settings
When enabled, the Enabler will ignore any network or wireless settings coming from the Avalanche MC Console and
use only the network settings on the MX9.
Properties Icon
Selecting the Properties icon displays the Manual Settings Properties dialog applet. From here, the user can configure
Network, DNS and Wireless parameters using the displays shown below:
Note: A reboot may be required after enabling or disabling these options.
10 - 16