Com1 Tab; Serial Port Pin 9 - Honeywell HX2 Reference Manual

COM1 Tab

Start > Settings > Control Panel > Scanner > COM1
This panel sets communication parameters for any device connected to the external port.
Adjust the settings and click the OK button to save the changes. Any changes take effect immediately.
This panel does not configure the connected device. Please refer to the documentation for the external connected or wireless
device for information on configuring the device.
Note: COM default values are restored after a cold boot or operating system upgrade.

Serial Port Pin 9

COM1 does not support 5V switchable power on pin 9 for handheld serial tethered scanners. Ring scanners are tethered to the
HX2. Handheld serial tethered scanners can be connected to the HX2 through the desktop cradle serial port.
4-130