Folders Copied At Startup; Saving Changes To The Registry - Honeywell HX2 Reference Manual

Folders Copied at Startup

The following folders are copied on startup:
System\Desktop
System\Favorites
System\Fonts
System\Help
System\Programs
AppMgr
Recent
This function copies only the folder contents, no sub-folders.
The Windows\Startup folder is not copied on startup because copying this folder has no effect on the system or an incorrect
effect.
Files in the Startup folder are executed, but only from System\Startup. Windows\Startup is parsed too early in the boot process
so it has no effect.
Executables in System\Startup must be the actual executable, not a shortcut, because shortcuts are not parsed by Launch.

Saving Changes to the Registry

The HX2 saves the registry when you:
Tap Start > Run then type Warmboot. Tap OK.
l
Perform a Suspend / Resume function (by pressing the Pwr key and then pressing it again).
l
The registry save process takes 0 – 3 seconds. If nothing has been changed, nothing is saved (e.g., 0 seconds)
The registry is automatically saved every 20 minutes. It is also saved every tenth time the registry settings are changed.
Registry settings are changed when control panel applet (e.g., Date/Time) parameters are changed by the user and a warm
boot was not performed afterward.
When you tap Start > Run then type Coldboot and tap the OK button, factory default registry settings are loaded during
coldboot. All customized changes and settings are lost.
4-4
copied to Windows\Desktop
copied to Windows\Favorites
copied to Windows\Fonts
copied to Windows\Help
copied to Windows\Programs
copied to Windows\AppMgr
copied to Windows\Recent