Display Stamping - Bosch NDE-8503-R User Manual

FLEXIDOME IP starlight 8000i
The camera LED activates when powering on the camera for the first time. The LED
deactivates automatically after 5 min.
Note: This option is enabled by default for the FLEXIDOME IP starlight 8000i models.
Heater
Select Auto to let the camera determine when the heater should be switched on.
Reboot device
Click the Reboot button to restart the device. The entire reboot sequence takes approximately
60 seconds.
Restore settings
Click Restore to restore all settings, except network settings, to their defaults.
Note: Clicking this button also clears the service-level password. Operators must reset the
password before doing anything else.
Factory defaults
Click Default to restore all settings, including passwords and network settings, to their
defaults.
Note: Clicking this button also clears the service-level password. Operators must reset the
password before doing anything else.
4.4.2

Display Stamping

Various overlays or stamps in the video image provide important supplementary information.
These overlays can be enabled individually and arranged on the image in a clear manner.
The drop-down menus below allow the configuration of the individual stamping options. The
respective sample windows show a preview of the configured text and background styles.
Click Set to apply the changes.
Global configuration
Notice!
i
These options can also be configured individually for all stamping regions.
Any changes to the global configuration settings will be applied to all stamping regions!
–
Select the desired font size of the overlays on the OSD: Normal Large or Custom.
Select Custom to enable the Font size (%) field.
–
Select the color for the alarm message to be displayed in.
–
Select the background color for the alarm message to be displayed in.
If you have enabled the Transparent background option, the background color is not
displayed in the OSD.
Camera name stamping
–
Select the position of the camera name overlay in the drop-down box. It can be displayed at
the Top, at the Bottom, or at a position of choice using the Custom option, or it can be set to
Off for no overlay information.
If the Custom option is selected, enter values in the X and Y position fields.
–
Bosch Security Systems B.V.
Stamping size
Text color
Background color
Position
Logo
User manual
Configuration | en 25
2021-01 | V02 | F.01U.385.211