Installation
Place the charger in an area that is free from excessive dirt, dust, water and other liquids, and contaminants.
The ambient temperature must be in the range 0° C and 40° C (32° F to 104° F). The docking station will not
charge batteries outside of this temperature range. For maximum performance, it is recommended that the
charger be operated at room temperature — a temperature range between 18°C to 25°C (64°F to 77°F).
Connecting to the Ethernet Network
Network Access
The Omnii automatically detects insertion into the docking station and loads the appropriate drivers to commu-
nicate with the network. To connect more docking stations downstream (up to 4 on the same network), use the
Ethernet cable supplied with your quad docking station as the daisy chain cable (see
configuration on page
Ethernet network connection
Figure 4-14
Left-side RJ45 port
(Ethernet connector to network)
Activity LED
(flashing green)
Daisy chain configuration
Figure 4-15
Ethernet network cable
4-17).
Link LED
(solid amber)
Maximum of four ST4004 Quad Docking Stations on one network cable
Daisy chain cable
Right-side RJ45 port
(Ethernet connector to
other docks)
10 or 100 Base-T
Ethernet connector
Daisy chain cable
Accessories 4 - 17
Figure 4-15 Daisy chain