B - 8 Omnii Hand-Held with Windows CE 6.0 User Manual
•
Tap on the + symbols to expand the lists so that you can view the parameter settings.
•
Scroll through the parameter list until you reach the parameter that you want to change.
•
For a parameter that can take a range of values:
- Highlight the parameter, and then press the [SPACE] key or double-click on the parameter.
- An associated dialog box containing the valid range of values for the parameter and the current setting
like the sample screen following is displayed.
- Type a value in the field provided.
•
For a parameter that toggles between two values such as on or off and enabled or disabled:
- Highlight the parameter and then press the [SPACE] key, or double-click on the parameter. Either
method toggles between the two available values.
•
When you've completed your edits, tap on OK.
The parameter list is displayed; the new value for the changed parameter is shown.
•
Tap on OK to exit to the preset list and save the changes.
Removing a Custom Preset
•
Highlight the custom preset you want to delete, and tap on the Remove button.
A window is displayed warning you that you are about to remove a preset.
•
Tap on Yes to remove the preset or No to cancel the operation.
Configuring the Barcode Decoding Camera Presets (Barcoding Menu)
To configure the barcode decoding camera presets:
•
Tap on Start>Settings>Control Panel>Imagers.
•
Tap on the Barcoding tab.