Table of Contents
Advertisement
Using the Phone
SIM Card Installation
Before using the HC700-G as a phone, make sure that your
phone is equipped with a SIM (Subscriber Identity Module)
card. SIM card is a small smart card that fits inside the
HC700-G. The SIM card holds the personalized information
about its user including the network activation and even
phone book entries.
Before installing the SIM Card, Turn off the HC700-G (see
page 10), disconnect the hand strap (see page 9) and remove
the battery (see page 27).
To install a SIM card, perform the following steps (see Figure
19):
1. Open the SIM card door.
2. Slide the SIM card holder forward to unlock the SIM card
and pivot up.
3. Slide the new SIM card inside the holder with the cut
corner on the upper right side and the gold plate facing
down.
4. Lower the SIM card holder and press downward to lock
the SIM card holder.
5. Close the SIM card door install the battery.
6. Perform Cold Reset "Resetting the HC700-G" on
page 19.
1
Figure 19. SIM Card Installation
30
4
3
2
5
6
Advertisement
Table of Contents
