WARNING
Environmental
Chiller Variant:
•
Operating Temperature: -20°C to +50°C (-4°F to +122°F)
•
Storage Temperature:-40°C to +60°C (-40°F to +140°F)
•
Humidity: 5% to 95% non-condensing (condensation-resistant)
•
Rain/Dust: IP65, IP67, IEC 60759
•
Drop Rating: Multiple 2 m (6.5 ft) drops to polished concrete
•
ESD: +/- 8 kV contact, +/- 15 kV air discharge.
Arctic Variant:
•
Operating Temperature: -30°C to +50°C (-22°F to +122°F)
•
Storage Temperature: -40°C to +60°C (-40°F to +140°F)
•
Humidity: Condensing (condensation-free using internal heaters)
•
Rain/Dust: IP65, IP67, IEC 60759
•
Drop Rating: Multiple 2 m (6.5 ft) drops to polished concrete
•
ESD: +/- 8 kV contact, +/- 15 kV air discharge.
Regulatory Approvals
•
Worldwide Safety, EMC, RF, Laser approvals
•
CE Mark
•
E Mark (vehicle cradles)
•
RoHS compliant
•
WEEE compliant
•
REACH compliant
Powered cradles are designed to allow the Omnii to be powered by a
vehicle battery. The battery installed in the Omnii is also recharged by the
vehicle battery. This option accepts DC power sources over the range
11.5V to 30V.
For Omnii XT15f Chiller units, voltages above that require the use of the
power preregulator Model No. PS1350. However, Omnii XT15f Arctic units
operating in temperatures from -30°C to +50°C, require the use of the
power preregulator Model No. PS1370.
For detailed information, see
page
4-22.
Omnii XT15f Freezer Variants F - 5
"ST1002 Powered Cradle Installation" on