Figure 89: Close The Installation - Motorola LEX L10i User Manual

Figure 89: Close the Installation

The driver is now installed.
7 Set up the ADB USB profile on your PC as follow-up with these steps:
a After driver installation, make sure there is a .android folder in your user profile directory.
b If you have installed and run ADB for the device before, run adb kill- server before you
can use the ADB.
c To see if ADB installs successfully, run adb devices from the command line.
Return to Process
ADB and USB Driver Setup
Send Feedback
on page 159
MN002347A01-B
Chapter 10: ADB and USB Driver Setup
163