Scanners; Barcodes; Scanner - Motorola 7545MBW User Manual

Go to the following website to find information about setting up this connection:
http://www.microsoft.com/en-us/download/default.aspx
or contact Motorola support services. Locate the office closest to you at:
tions.com/US-EN/Support/Psion+Services+and+Support?WT.mc_id=psion__support_

Scanners

The Scanners icon in the Control Panel provides dialog boxes in which you can tailor barcode scanner config-
uration and choose the barcodes your scanner will recognize. The parameters are preset with the default
settings of the decoded scanner installed in the unit.
NOTE
To enable a newly-installed scanner, press and hold down the [FN] key and the
[Power] key simultaneously for a minimum of three seconds.
You can test the scanner to ensure that it is operating properly by pointing the scanner window at a barcode
that your scanner was designed to decode — for example, a 1D UPC barcode or 2D barcode. Press the SCAN
key or pistol trigger, and check for a valid decode on the hand-held screen.
For a listing of available scanners and their specifications, please refer to

Barcodes

Scanner

The drop-down menu to the right of the Scanner option allows you to choose configurations for one of the
following scanner types, depending on what is installed in/on your hand-held: Decoded (internal), Decoded
(Intermec ISCP), Imager and Non-decoded.
The symbologies listed in the Barcodes tab change to reflect the scanner you choose and the barcodes it
supports. Always defer to your barcode scanner's programming manual when in doubt about the availability or
settings for any parameter.
Configuration 3 - 55
http://www.motorolasolu-
Appendix E: "Omnii Specifications".