Trigger Mappings - Motorola 7545MBW User Manual

Trigger Mappings

A trigger mapping is an association between a particular key on the keyboard and a driver or application, the
module(s) — sometimes referred to as trigger consumer(s) — of the trigger source. Along with keyboard keys,
the external trigger (scan button) is software-based. When the specified key is pressed, the owner (for
example, a decoded scanner) is sent a message.
IMPORTANT
Double-Click
When a key is pressed and released, then pressed again within the configured time (between 0 to 1000 msec),
a double-click occurs. See also
Show All Modules
By default, the trigger mapping list only shows active mappings. Mappings for drivers or applications that are
not currently active are not normally displayed. By checking this check box, all mappings, both active and inac-
tive, are displayed.
Add
Tapping this button brings up the Add Mapping dialog (see
that you can add new trigger mappings.
Edit
Tapping this button brings up the Edit Mapping dialog (see
that you can edit existing trigger mappings.
Remove
Tapping this button removes an existing mapping.
OK
The OK button in the top right of the Manage Triggers screen saves all changes made. If the cancel button X is
tapped instead, or the [ESC] key is pressed, all changes made will be discarded.
It is not possible to have two or more identical mappings — for
example [F1] cannot be mapped to the Non-Decoded Scanner twice
— even if the trigger type is different.
A keyboard key that is used as a trigger source will no longer gener-
ate key data, or perform its normal function. For example, if the
space button is used as a trigger source, it will not be able to send
space characters to applications.
"Trigger-Press Type" on page
Configuration 3 - 41
3-42.
"Add and Edit Trigger Mapping" on page
"Add and Edit Trigger Mapping" on page
3-42), so
3-42), so