Table of Contents
Advertisement
Low Light
This preset is designed for very dark conditions such as inside a warehouse where the lights are kept low, or
inside an unlit truck. This preset increases either the exposure time or the gain.
Low Power
This preset minimizes the use of the flash so as to conserve the battery power on the hand-held.
Glossy Surface
This preset minimizes the use of the flash so as to reduce reflection. This preset is used to read barcodes that
are behind glass, or inside the plastic window of an envelope.
Image Capture Predefined Presets (Imaging Menu)
The following presets enable successful image capture in almost all conditions.
NOTE
It is recommended that the default preset be used whenever possible.
Default
This preset works in a wide range of conditions. It is optimized for a normal office lighting (about 300 Lux).
Motion
This preset uses a shorter exposure time so as to freeze motion.
Low Light Near
This preset is designed for dark conditions, it uses a longer exposure time and includes the flash.
Using the Imagers Applet
Configuring the Image Capture Presets (Imaging Menu)
To configure the image capture presets, open the dialog box as follows:
•
Tap on Start>Settings>Control Panel.
•
Tap on the Imagers icon, and if it's not already selected, tap on the Imaging tab.
The following screen is displayed.
Imager & Camera Settings B - 5
Advertisement
Table of Contents
Troubleshooting
