Using Microsoft ActiveSync
NOTE
If you use a serial port to connect devices like the Omnii to your desktop computer,
the connection may not succeed because ActiveSync has trouble connecting at
non-default baud rates.
To work around this problem, set the ActiveSync baud rate on the desktop to use the
same baud rate as the device. You can set the baud rate by editing the registry on the
desktop host computer, as detailed in the steps outlined at the following website:
http://support.microsoft.com/kb/324466
To install ActiveSync, follow the step-by-step instructions provided with the program setup wizard. For details,
go to the following website and type the name into the search box:
http://www.microsoft.com/downloads/en/default.aspx
Using Windows Mobile Device Center
If you are running Windows Vista, Windows 7, or later, your data transfers do not require ActiveSync.
Instead, you will need to download Windows Mobile Device Center. For instructions, go to the following
website and type the name into the search box:
http://www.microsoft.com/downloads/en/default.aspx
To transfer data between your PC and your hand-held:
•
Tap on Start>Computer to display the drives. The Omnii will be visible here.
•
Open drives, files and folders as you would on your PC.
Display Properties
•
In the Control Panel, choose the Display icon.
Background
•
In the Display Properties dialog box, open the Background tab. This dialog box allows you to customize
your background image.
Configuration 3 - 23