Ac Wall Adaptor - Models St1050 And St1050-Ar; Vehicle Power Outlet Adaptor - Model St3113 - Motorola 7545MBW User Manual

• Connect the charger to an AC or DC power source using the appropriate regional plug or cable. Then
connect the charger DC plug into the Snap Module DC jack. You can also attach an ST4001 or ST4005
Snap Module to the Omnii and use the Omnii battery to power USB or serial peripherals, for enhanced
mobility.
NOTE
If you are using a hand strap, there is no need to remove it before installing the Snap
Module, since the Omnii hand strap slot will still be accessible.

AC Wall Adaptor - Models ST1050 and ST1050-AR

The AC wall adaptor available for your docking station or Snap Module allows you to operate your hand-held
using AC power while charging the battery inserted in the unit.
The ST1050 is shipped with adaptor plugs suitable for use in the following regions: United Kingdom, Australia,
Europe and North America.
• Choose the adaptor plug that is suitable for use in your country. Slide the adaptor plug into the Universal
AC power supply, snapping it into place. These two pieces, coupled together, are referred to as an AC wall
adaptor.
• Insert the DC plug into the docking station or Snap Module jack.
• Plug the pronged end into an AC outlet.
ST1050 AC Wall Adaptor and plugs
Figure 4-7
The ST1050-AR wall adapter is kitted with an AC plug that is suitable for use in Argentina.

Vehicle Power Outlet Adaptor - Model ST3113

The Vehicle Power Outlet Adaptor allows you to power your hand-held and recharge your battery using power
drawn from your vehicle's automotive power outlet when used in conjunction with a Snap Module.
ST3113 Vehicle Power Outlet Adaptor
Figure 4-8
• Attach a Snap Module to the base of the hand-held. Refer to
further details.
• Insert the DC power plug on the Vehicle Power Outlet Adaptor into the DC IN port on the Snap Module.
Adaptor plugs
AC power supply
DC power plug
Adaptor plug
"Snap Modules" on page 4-7
Accessories 4 - 9
DC power plug
if you require