Audio Indicators; Vibrations; Inserting The Microsd Card And Sim Card; Inserting The Cards - Motorola 7545MBW User Manual

2 - 14 Omnii Hand-Held with Windows CE 6.0 User Manual
Docking Device
When a hand-held is inserted in a docking station, charger or cradle, an associated icon appears in
the taskbar.
Combo Charger &
Combo Docking Station
Bluetooth Radio
This icon displayed in the taskbar represents the installed Bluetooth radio.
Input Panel
You can tap the Input Panel icon to activate the soft keyboard application.

Audio Indicators

The Omnii supports several audio options, including Bluetooth. The optional rear speaker can be used for
system (Windows) sounds and .wav files. When a rear speaker is absent, those sounds are routed to the front
receiver. The beeper provides a variety of sounds and can be configured to emit a sound when a key is
pressed, a keyboard character is rejected, scan input is accepted or rejected, an operator's entry does not
match in a match field or the battery is low. The volume rocker button is located on the left side of the
hand-held. Information on configuring sounds is detailed in

Vibrations

You can set the Omnii to vibrate when a successful or unsuccessful barcode scan is performed. See
ners" on page 3-55.

Inserting the microSD Card and SIM Card

There are two slots available in the battery compartment — the lower slot is provided for a microSD (Secure
Digital) card, which provides additional non-volatile memory to your Omnii, and the upper slot is for a SIM
(Subscriber Identity Module) card, which allows access to the Voice option, access to the Internet, and so on.
SD Cover

Inserting the Cards

• Switch off the power to the Omnii.
• Remove the battery.
Quad Docking Station Powered Vehicle Cradle, Desktop Dock
"Volume & Sounds Properties" on page
& Snap Module
microSD Card Slot
SIM Card Slot
3-79.
"Scan-