Table of Contents
Advertisement
Allow Suspend With
This menu allows you to specify whether or not your unit will enter Suspend Mode while it is operating with an
active PPP connection, network interface or active TCP/IP connection.
Low Power Warnings
The sliding scale at the bottom of this menu allows you to specify the remaining battery capacity at which a
warning message is displayed on the Omnii screen, from 0% to 20%.
Built-in Devices
•
In the Power Properties dialog box, open the Built-in Devices tab.
WWAN Power Mode
This menu allows you to enable power to your WWAN radio, and whether or not the radio will turn off when the
Omnii enters Suspend Mode. To configure the radio, please refer to
(WWAN)
Settings".
Battery Health
The Battery Health service provides an estimate of battery health based on a number of different measure-
ments, beyond just capacity.
IMPORTANT
•
In the Power Properties dialog box, open the Battery Health tab.
Battery Health is an estimate and should not be depended on to
provide a 100% account of battery condition.
Configuration 3 - 47
Appendix G: "Wireless Wide Area Network
Advertisement
Table of Contents
Troubleshooting
