Monitoring The Network Connection; Wifi Connect A.r.c - Motorola 7545MBW User Manual

Roaming - AP Delta
This sets how much greater (in dBm) the RSSI of a new access point must be than the RSSI of the currently
associated access point in order for the hand-held to initiate a roam. Values range from 5 to 30 dBm.
Concluding the Wi-Fi Configuration
If you've made changes in the Advanced menus, you will need to warm reset your Omnii.
• Choose Start>Shutdown>Warm Reset.
• A dialog box is displayed letting you know that you will lose all unsaved data. Tap on OK.
Once the reset is complete, if you checked the box next to Use Windows to configure my wireless settings,
the Wireless Zero Config screen is displayed on the hand-held. Refer to
Settings" for details.

Monitoring the Network Connection

The radio signal icon in the taskbar indicates the strength of the communication link with an 802.11
access point.
To access the radio signal icon:
• Tap on the radio icon in the taskbar to display the wireless statistics dialog box.
To access the radio signal icon using the keyboard:
• Press the [Windows] key to display the Start Menu.
• Highlight Shortcuts and then choose System Tray from the sub-menu.
• Use the [LEFT] and [RIGHT] arrow keys to highlight the radio signal icon in the taskbar.
• Press [Enter] to display the Wireless Statistics dialog box.
NOTE
Moving in and out of the radio coverage area can have varying effects on a network
session. At times, you may need to renew your connection by logging in again.

WiFi Connect A.R.C.

The WiFiConnectARC utility on the desktop provides a quick method to configure a device for use on a private
network, primarily for use with Active Remote Configuration (A.R.C.).
When you click on this icon, WiFiConnect A.R.C. configures the default WiFi interface. The WEP key is set to
PsionPsion123. The SSID is set to Psion. The default interface becomes the active interface. Keep in mind
that you must configure the access point and the hand-held(s) to use the same settings.
Refer to the Active Remote Configuration (A.R.C.) Administrators Guide, PN 8000252, for details about
updating devices on your network. This manual is available at:
http://community.psion.com/knowledge/w/knowledgebase/1189.a-r-c-active-remote-configuration.aspx
Configuration 3 - 89
Appendix H: "Wireless Zero Config