Motorola 7545MBW User Manual page 242

Parameter
Aiming Element:
Visible Laser Diode
(VLD)
Aiming Dot Optical
Power
Illumination System:
LEDs
Pattern Angle
Shock
Vibration
ESD
Laser Safety Class
LED Class
Temperature:
Operating
Storage
Humidity:
Operating)
Storage
Maximum Engine
Dimensions
Weight
Electrical Interface
NOTE: Environmental and/or tolerance parameters are not cumulative. A thermal analysis is
recommended if the application is subject to an extreme temperature environment.
Internal Imager & Scanner Specifications D - 16
655 ±5 nm (dominant wavelength)
0.6 mW (typical)
625 ± 5 nm (dominant wavelength)
16º horizontal x 11.5º vertical
2000 G ± 5% in the direction of any of the six principal axes applied
via the mounting surface at -20º and 55º C for a period of 0.85 ±
0.1 msec
2500 G ± 5% in the direction of any of the six principal axes applied
via the mounting surface at 23º C for a period of 0.70 ± 0.07 msec
Unpowered SE4600LR withstands a random vibration along each
of the X, Y, and Z axes for a period of one hour per axis (6 G rms),
defined as follows:
20 to 80 HzRamp up at 0.04 G
2
80 to 350 Hz 0.04 G /Hz
350 Hz to 2 kHz Ramp down at 0.04 G
± 2 kV @ connector
CDRH / IEC Class 2
IEC Class
-20º to 55º C (-4º to 131º F)
-40º to 70º C (-40º to 158ºF)
(-30º C (22º F) for Omnii XT15f Arctic variant)
95% RH, non-condensing at 55º C
85% RH, non-condensing at 70º C
38.23 mm W x 19.34 mm H x 27.00 mm D
1.51 in. W x 0.76 in. H x 1.06 in. D
45 - 52 grams (1.59 - 1.83 oz)
27 pin 0.3 mm pitch ZIF connector
Specification
2
/Hz at 3 dB/octave
2
/Hz at 3 dB/octave