Motorola 7545MBW User Manual page 178

4 - 20 Omnii Hand-Held with Windows CE 6.0 User Manual
Pedestal mounts are recommended for all fixed mount locations because they offer optimal operator access. In
addition, for safety reasons, only pedestal mounts with fully locking joints should be used in vehicles. Always
adjust the pedestal for the optimum viewing angle, and securely tighten the hex and wing screws.
The most effective way to mount the vehicle cradle is to use brackets with the MT3324 (short arm) or MT3325
(standard arm) kit. The ST1002 requires either the MT3326 or MT3327 bracket; the ST1000 requires the
MT3328 bracket.
IMPORTANT
A clamp base is required to secure the vehicle cradle/arm assembly to the vehicle. Choose from one of the
following clamp base sizes:
• MT3505
• MT3507
Model
MT3505
MT3507
MT3509
MT3510
Clamp and Rail Bases (Torque to 26 in-lbs)
Figure 4-17
It is strongly recommended that all forklift mounting solutions use clamp
bases rather than plate bases that require penetrating through the vehicle
for installation.
Rail Width
Clamp base (for 4" or 12" RAM arm), 2" max. width
Clamp base (for 4" or 12" RAM arm), 3" max. width
Rail base (for 4" or 12" RAM arm), 1-1/4" to 1-7/8"
Rail base (for 4" or 12" RAM arm), 2" to 2 1/2"