Table of Contents
Advertisement
4 - 26 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual
•
Enter your enrollment password – supplied by your company's network administrator or generated from
your company pre-enrollment wizard.
•
Type your company e-mail address and the enrollment password provided by your network
administrator.
NOTE
If you uncheck Automatically discover server, a Server field is displayed where you
must manually enter the server name.
Allow a few minutes for your Workabout Pro4 to sync and enroll in your company domain. You may need to
restart your unit after the enrollment process is completed.
Network Cards
When the network card is inserted in your unit for the first time, the Network Settings screen is displayed auto-
matically so that you can configure the card. If it does not appear, or if you want to change settings:
•
Tap on Start>Settings>Connections.
•
Tap on the Network Cards icon.
•
If you need to specify server information, double-tap on the appropriate adaptor, and then tap on the IP
Address and/or Name Servers tab.
NOTE
Because most networks use DHCP, you should not need to change these settings
unless instructed to do so by your network administrator.
Draft #6
Advertisement
Table of Contents
