Limiting Data Connection To A Network; Editing Access Point Names - Motorola LEX L10i User Manual

Return to Process
Wireless Wide Area Networks
9.1.4

Limiting Data Connection to a Network

You can limit the device Private or Public services or extend the battery life by limiting the data
connections to Global networks, LTE networks, or CDMA networks.
NOTICE: This feature is only available on some networks. Check with service provider.
When and where to use: Use this procedure to limit data connection to a network.
Procedure:
1 Tap .
2 Tap .
3 Tap More ... .
4 Tap Mobile networks.
5 Tap Network Mode.
6 Select Global mode, LTE only, or CDMA only .
7 Tap .
Return to Process
Wireless Wide Area Networks
9.1.5

Editing Access Point Names

When and where to use: When network information needs to change, the user can edit the APN
information. If a new SIM card is added that does not have the required APN configured, to configure
see Switching Modes Using the Power Button on page
NOTICE: Many service provider Access Point Name (APN) data are pre-configured in the LEX
L10i.
Procedure:
1 Tap .
2 Tap .
3 Tap More ... .
4 Tap Mobile networks.
5 Tap Access Point Names.
6 Tap .
7 When finished, tap .
8 Tap Save.
9 Tap the radio button next to the new APN name to start using it.
Send Feedback
on page 137
on page 137
62.
MN002347A01-B
Chapter 9: Wireless
143