Checking And Replacing The Main Fuse - Invacare Spectra XTR Service Manual

®
Invacare - Bora
7.8

Checking and replacing the main fuse

CAUTION: Fire hazard!
A short circuit can cause extremely high currents which can result in spark formation and
fire!
 Always use an original strip fuse with the approved amperage.
 If the main fuse has blown, first rectify the cause before fitting a new one.
CAUTION: Fire hazard!
Fitting the incorrect strip fuse causes a fire hazard!
 Only fix the strip fuses in the sequence shown in the image on the right!
 Tighten the nuts with 3.3 to 3.5 Nm!
Requirements:
 Phillips screwdriver
 Strip fuse
 socket spanner, 8 mm
 torque wrench 0-20 Nm (or similar)
Note
A spare fuse is located behind the Invacare logo on the rear battery.
Note
If the fuseholder is damaged, you can replace this complete with the battery cables.

Remove both battery cases as
described in Chapter 7.7.1.

Remove the covers on both battery
cases as described in Chapter 7.7.2.
SERVICE MANUAL
1. Strip fuse
2. Spade terminal
3. DIN 6923 nut
59