Vr2 Remote: Error Codes And Diagnostic Codes - Invacare Spectra XTR Service Manual

®
Invacare - Bora
6.3

VR2 remote: Error codes and diagnostic codes

Evaluate the cause using the following blink codes. The following figure shows which LEDs are
located on the remote.
1) Battery display
2) Profile indicator
3) Adjusting motors
Error code
1 LED battery display
2 LED battery display
3 LED battery display
4 LED battery display
5 LED battery display
6 LED battery display
7 LED battery display
8 LED battery display
POSSIBLE SOLUTION
CAUSE
Batteries Charge battery
discharged Check cable to batteries
Error at left-hand Check connection plug, check
motor motor
Connection
loose/defective
or motor
defective
Short-circuit in Check connection plug, check
left-hand motor motor
Error at right- Check connection plug, check
hand motor motor
Connection
loose/defective
or motor
defective
Short-circuit in Check connection plug, check
right-hand motor motor
The mobility Remove battery charger
device has been
blocked by an
external signal,
for example
because the
charger is
connected.
Fault on drive Put the drive lever in a central
lever position before switching the
remote on.
Fault in the Check cable
electronics
SERVICE MANUAL
Documentation
See chapter 7.9.
See chapters 7.9
and 7.2
See chapters 7.9
and 7.2
See chapters 7.9
and 7.2
See chapters 7.9
and 7.2
See chapter 7.9.
31