SERVICE MANUAL
7.17
Checking an adjusting motor
Requirements:
Multimeter
Remove legrests.
Release seat (1) and tilt forwards.
Remove the adjusting motor plug from
the electronics module or ACT (see
Chapter 4.2).
Check the electrical resistance at the
adjusting motor plug (1).
The plug may have a different shape to
that shown in the picture.
If the resistance is close to infinity, the
motor is probably burnt out.
If the resistance is below 1 , the motor
has a short-circuit.
The motor must be replaced in both
cases.
80
®
Invacare
- Bora