SERVICE MANUAL
7.2.3
Replacing the jaw clutch
Loosen the motor screw (1) with the 5
mm Allen key.
Remove the motor from the
transmission.
Remove the clutch (2) from the motor (1)
using the screwdriver
Place a new clutch on the motor.
Observe the position of the groove (3) on
the motor.
The motor is reassembled in reverse
order to disassembly.
Insert the motor carefully into the
transmission to avoid damage. Observe
the position of the groove (1) in the
transmission.
The cable must be routed so that it does
not rub or get trapped.
Insert the motor plug into the electronics
module.
Secure the motor cable with cable ties.
40
®
Invacare
- Bora