Replace Carbon Brushes - Invacare Spectra XTR Service Manual

®
Invacare - Bora
7.2.4

Replace carbon brushes

Note
The carbon brushes are located under plastic caps outside each motor. This makes them easily
accessible so that they can be replaced without removing the motor.
Always replace the carbon brushes on both motors.

Carefully remove the plastic cap (1) on
the motor with the screwdriver.

Remove the plastic cap (1) and the
carbon brushes (3).

Insert new carbon brushes (3) through
the openings (2) on the motors. In doing
so, the spring must face upwards.

Carefully screw in the plastic cap (1) on
the motor with the screwdriver.
SERVICE MANUAL
41