SERVICE MANUAL
7.14.2 Repairing punctures (wheel size 280/250-4)
Requirements:
Allen key 6m
jaw spanner 13 mm
2 x small ring spanners or flat screwdrivers (for pulling off tyres)
Repair kit for tyre repair or a new inner tube.
Talcum powder
Removing the wheel
Block up the vehicle (place wooden blocks
under frame).
Undo the bolt (1) and remove it using the Allen
key on one side and the jaw spanner on the
other (as a counter).
Pull the wheel out of the fork.
Note
Re-assembly is done in reverse order. Ensure that the tyre is replaced on the same side and in
the same travel direction as it was previously mounted.
74
®
Invacare
- Bora