®
Invacare
- Bora
7.2.2
Replacing the motor
Loosen the motor screw (1) with the 5
mm Allen key.
Remove the motor from the
transmission.
The motor is reassembled in reverse
order to disassembly.
The motor must be carefully inserted into
the transmission to avoid damage.
Observe the position of the groove (1) in
the transmission.
The cable must be routed so that it does
not rub or get trapped.
Insert the motor plug into the electronics
module.
Secure the motor cable to the frame with
cable ties.
SERVICE MANUAL
39