Ports - Draytek Vigor2130 Series User Manual

Domain Name
When PPPoE is selected as connection type, you need to configure the following settings:
Username
Password
Confirm Password
MTU Size
After finishing all the settings here, please click OK to activate them.
4 . 1 . 3 P o r t s
4 . 1 . 3 P o r t s
Ports page is used to change the setting for WAN port. You can set or reset the following
items. All of them are described in detail below.
Port
Link
Speed Current
Speed Configured
Type the domain name obtained from the ISP.
Type the name obtained from the ISP.
Type the password obtained from the ISP.
Type the password again for confirmation.
It means Max Transmit Unit for packet. The default setting
will be specified by the system automatically. Therefore,
keep this field in blank.
It displays current network interface.
It displays current connection status. Green light means the
WAN connection is successful.
It displays current speed that the router uses.
You can use the drop down list to choose the required speed
for the router. If you have no idea in configuring speed,
simple use the default setting, Auto.
74
Vigor2130 Series User's Guide