Remote Dial-In Status - Draytek Vigor2130 Series User Manual

Advanced Settings
4 . 8 . 4 R e m o t e D i a
4 . 8 . 4 R e m o t e D i a
You can find the summary table of all dial-in user status.
Client
Identity
Endpoint
IKE Status
IKE Alg
Phase 1 (IKE) - Negotiation of IKE parameters including
encryption, hash, Diffie-Hellman parameter values, and
lifetime to protect the following IKE exchange, authentication
of both peers using either a Pre-Shared Key or Digital
Signature (x.509). The peer that starts the negotiation
proposes all its policies to the remote peer and then remote
peer tries to find a highest-priority match with its policies.
Phase 2 (IPSec) - Negotiation IPSec security methods
including Authentication Header (AH) or Encapsulating
Security Payload (ESP) for the following IKE exchange and
mutual examination of the secure tunnel establishment.
l - i n S t a t u s
l - i n S t a t u s
Display the name of the VPN IPSec/Mobile client.
Display the remote ID of the VPN client.
Display the IP address of the VPN client.
Display the status of the phase 1 ISAKMP key exchange.
Display
during phase 1 of the VPN connection Establishment.
The algorithm is used during exchange of key exchange.
the encryption and authentication algorithm used
142
Vigor2130 Series User's Guide