Draytek Vigor2130 Series User Manual page 75

P P P o E
P P P o E
To choose PPPoE as the accessing protocol of the internet, please select PPPoE from the
Internet Access menu. The following web page will be shown.
Username
Password
Redial Policy
Idle Time Out
MTU Size
Fixed IP (IPCP)
Fixed IP Address (IPCP)
Mode
Vigor2130 Series User's Guide
Type in the username provided by ISP in this field.
Type in the password provided by ISP in this field.
If you want to connect to Internet all the time, you can choose
Always On. Otherwise, choose Connect on Demand.
Set the timeout for breaking down the Internet after passing
through the time without any action. When you choose Connect
on Demand, you have to type value here.
It means Max Transmit Unit for packet. The default setting will
be specified by the system automatically.
Usually ISP dynamically assigns IP address to you each time
you connect to it and request. In some case, your ISP provides
service to always assign you the same IP address whenever you
request. In this case, you can fill in this IP address in the Fixed
IP field. Please contact your ISP before you want to use this
function. Click Yes to use this function
Type in a fixed IP address in the box if you click Yes for Fixed
IP(IPCP).
Such function allows you to verify whether network connection
is alive or not through ARP Detect or Ping Detect. Choose ARP
67