Status - Draytek Vigor2130 Series User Manual

4 . 1 1 . 4 S t a t u s
4 . 1 1 . 4 S t a t u s
From this page, you can find codec, connection and other important call status for each port.
Auto-refresh
Refresh
Port
Vigor2130 Series User's Guide
OutBand - Choose this one then the Vigor will capture the
keypad number you pressed and transform it to digital form
then send to the other side; the receiver will generate the
tone according to the digital form it receive. This function
is very useful when the network traffic congestion occurs
and it still can remain the accuracy of DTMF tone.
SIP INFO- Choose this one then the Vigor will capture the
DTMF tone and transfer it into SIP form. Then it will be
sent to the remote end with SIP message.
Payload Type (rfc2833) - Choose a number from 96 to
127, the default value was 101. This setting is available for
the OutBand (RFC2833) mode.
Check this box to enable an automatic refresh of the page at
regular intervals.
Click it to reload the page.
It shows the VoIP connection status.
IDLE - Indicates that the VoIP function is idle.
HANG_UP - Indicates that the connection is not
established (busy tone).
CONNECTING - Indicates that the user is calling out.
WAIT_ANS - Indicates that a connection is launched and
waiting for remote user's answer.
ALERTING - Indicates that a call is coming.
187