Trace Route; Routing Table - Draytek Vigor2130 Series User Manual

4 . 1 5 . 2 T r a c e R
4 . 1 5 . 2 T r a c e R
Click Diagnostics and click Trace Route to open the web page. This page allows you to trace
the routes from router to the host. Simply type the IP address of the host in the box and click
Run. The result of route trace will be shown on the screen.
IP Address / Domain
Start
4 . 1 5 . 3 R o u t i n g
4 . 1 5 . 3 R o u t i n
Click Diagnostics and click Routing Table to open the web page.
Destination
Gateway
Genmask
Flags
Vigor2130 Series User's Guide
o u t e
o u t e
T a b l e
g T a b l e
Type in the IP address /domain of the Host/IP that you want
to trace.
Click this button to start the route tracing work. The result
will be displayed on the screen.
Display the IP address for destination network or destination
host.
Display the gateway address or "*" if none set.
the netmask for the destination net;
Display
'255.255.255.255' is for a host destination and '0.0.0.0' is for
the default route.
Different codes represent different routing status.
U - route is up.
H - target is a host
G - use gateway
R - reinstate route for dynamic routing
D - dynamically installed by daemon or redirect
M - modified from routing daemon or redirect
A - installed by addrconf
219