Draytek Vigor2130 Series User Manual page 44

6. Setup a pre-shared key, which must be the same as in Vigor2130.
7. Enter Vigor2130's private network in the Remote Network IP / Mask field.
8. Click OK.
Note: Vigor2130 supports the following proposals by default.
For phase 1,
Mode Selection
When you select Automatic
When you select 3DES
When you select AES(any)
When you select AES-128
When you select AES-192
When you select AES-256
For phase 2,
Mode Selection
When you select Automatic
When you select 3DES
When you select AES(any)
When you select AES-128
When you select AES-192
When you select AES-256
Proposals will be sent
3DES, MD5, Group 5;
3DES, SHA1, Group 5;
3DES, SHA1, Group 2;
3DES, MD5, Group 2;
3DES, MD5, Group 5;
3DES, SHA1, Group 5;
3DES, SHA1, Group 2;
3DES, MD5, Group 2;
AES, MD5, Group 5;
AES, SHA1, Group 5;
AES, MD5, Group 2;
AES, SHA1, Group 2;
AES-128, MD5, Group 5;
AES-128, SHA1, Group 5;
AES-128, MD5, Group 2;
AES-128, SHA1, Group 2;
AES-192, MD5, Group 5;
AES-192, SHA1, Group 5;
AES-192, MD5, Group 2;
AES-192, SHA1, Group 2;
AES-256, MD5, Group 5;
AES-256, SHA1, Group 5;
AES-256, MD5, Group 2;
AES-256, SHA1, Group 2;
Proposals will be sent
AES, SHA1;
AES, MD5;
3DES, SHA1;
3DES, MD5;
3DES, MD5;
3DES, SHA1;
AES-256, MD5;
AES-256, SHA1;
AES-128, MD5;
AES-128, SHA1;
AES-192, MD5;
AES-192, SHA1;
AES-256, MD5;
AES-256, SHA1;
36
Vigor2130 Series User's Guide