Backup - Draytek Vigor2130 Series User Manual

Refresh
After finishing all the settings here, please click OK to activate them.
4 . 1 . 4 B a c k u p
4 . 1 . 4 B a c k u p
This page is used to setup 3G/56K backup function. If you enable 3G/56K backup, make sure
your WAN connection type is not in 3G/56K mode. When the WAN connection is broken,
router will try to keep the connection with 3G/56K mode. After WAN connection is recovered,
router will disconnect the 3G/56K connection automatically.
If both USB ports connected with 3G modem and 56K modem, and both 3G Backup and 56K
Backup modes are enabled, the system will determine which one (3G Backup or 56K Backup)
will be selected as backup mode according to the detected physical connection automatically.
3 G B a c k u p
3 G B a c k u p
Enable 3G Backup
SIM PIN code
Modem Initial String1/2
APN Name
Modem Dial String
PPP Username
PPP Password
Clone MAC Address
Click this button to refresh the information for WAN port.
Check this box to enable such function.
Type PIN code of the SIM card that will be used to access
Internet.
Such value is used to initialize USB modem. Please use the
default value. If you have any question, please contact to
your ISP.
APN means Access Point Name which is provided and
required by some ISPs.
Such value is used to dial through USB mode. Please use the
default value. If you have any question, please contact to
your ISP.
Type the PPP username (optional).
Type the PPP password (optional).
It is available when the box of Enable is checked. Click
Clone MAC Address. The result will be displayed in the
field of MAC Address.
76
Vigor2130 Series User's Guide