General Setup - Draytek Vigor2130 Series User Manual

4 . 9 . 2 G e n e r a l S e t
4 . 9 . 2 G e n e r a l S e t
By clicking the General Setup, a new web page will appear so that you could configure the
SSID and the wireless channel.
Please refer to the following figure for more information.
Enable Wireless LAN
Show/Hide
SSID
Isolate LAN
Isolate Member
Wireless Mode
u p
u p
Check the box to enable the wireless function.
Choose Show to make the SSID being seen by wireless
clients.
Choose Hide to prevent from wireless sniffing and make it
harder for unauthorized clients or STAs to join your wireless
LAN.
It means the identification of the wireless LAN. SSID can be
any text numbers or various special characters. The default
SSID is "DrayTek". We suggest you to change it.
Check this box to make the wireless clients (stations) not
accessing the PC with wired connection.
Check this box to make the wireless clients (stations) with the
same SSID not accessing for each other.
Choose the wireless mode for this router. At present, only
802.11B/B/N mix is available.
150
Vigor2130 Series User's Guide