Draytek Vigor2130 Series User Manual page 119

Source
Destination
Protocol
Source Port / Destination
Port
Source Address /
Destination Address
Source MAC Address
Action
Time Profile
Click OK to save the settings.
Vigor2130 Series User's Guide
Specify the interface for the starting point.
Specify the interface for the ending point.
Specify the protocol(s) which this filter rule will apply to.
Type a fixed port number or a range of port number for such
rule. Available value is 1 ~ 65535.
Type WAN IP or LAN IP address based on the WAN or
LAN interface specified in Source / Destination fields.
Note that the format for this field must be "address[/mask]",
e.g, 192.168.1.123 or 172.16.9.0/24.
Specify the MAC address for the packets.
Choose the action to perform for the filtered packet.
Accept – Packets matching with such rule can pass through
the router.
Drop - Packets matching with such rule will be discarded
immediately.
Reject - Packets matching with such rule cannot pass
through the router and become packets with TCP reset or
ICMP port unreachable packets.
Specify a period for filtering the packets with web feature
filter. Use the drop down list to choose the time setting, or
click New Time Object to define a time period for you
necessity.
New Time Object – Such link allows you to create new time
object for using by web feature filter. The method to
configure the time object is that same as set in
Firewall>>Time Object.
111